Mosfets pre-assembled on the seating plate
These mosfets may replace single mosfets (which, however, can still be purchased separately), easing and speeding up their installation. This way, client can choose between the two solutions for the repair process. Among the advantages of the pre-assembled mosfets we can highlight speed and ease of their replacement, and most important a pre-assembled product features a potentially better quality compared to manual assemble performed in place. The table above shows a brief compatibility list between mosfets and vechicle models. The new W-05328 is the only item suitable to be mounted on Fiat Stilo 1st generation.
Undersized seals
When power steering racks are particularly worn out and eventually show rust, you can rectify them removing material for 0.5mm or 1mm. After this work, the standard parts will no longer fit to be mounted on these racks as they are larger than the rod. It is therefore necessary to replace them with others with a smaller inner diameter than the original version. Emmetec therefore proposes bushes and seals in the two versions:
X = -0.5mm compared to the original red (backring and bush)
XX = -1mm compared to the original blue (backring and bush)
With the production of these undersized items, you can efficiently overhaul racks which should be otherwise thrown away, with higher costs for garages both for disposal and the repair pocess itself.